1 - 47  of  47 records  
No Aluminum Alloy/Tempers Chemical Composition Definition
1 6061-O Silicon 0.4% - 0.8% Iron max 0.7% Copper 0.15% - 0.40% Manganese max 0.15% Magnesium 0.8% - 1.2% Chromium 0.04% - 0.35% Zinc max 0.25% Titanium max 0.15% Other elements 0.15% total Remainder Aluminium The mechanical properties of 6061 depend greatly on the temper, or heat treatment, of the material. Young's Modulus is 10 Msi (69 GPa) irrespective of temper. Annealed 6061 (6061-O temper) has maximum tensile strength no more than 18,000 psi (125 MPa), and maximum yield strength no more than 8,000 psi (55 MPa). The material has elongation (stretch before ultimate failure) of 25-30 %.
2 6061-T4 Silicon 0.4% - 0.8% Iron max 0.7% Copper 0.15% - 0.40% Manganese max 0.15% Magnesium 0.8% - 1.2% Chromium 0.04% - 0.35% Zinc max 0.25% Titanium max 0.15% Other elements 0.15% total Remainder Aluminium The mechanical properties of 6061 depend greatly on the temper, or heat treatment, of the material. Young's Modulus is 10 Msi (69 GPa) irrespective of temper. T4 temper 6061 has an ultimate tensile strength of at least 30,000 psi (207 MPa) and yield strength of at least 16,000 psi (110 MPa). It has elongation of 16%.
3 6061-T6 Silicon 0.4% - 0.8% Iron max 0.7% Copper 0.15% - 0.40% Manganese max 0.15% Magnesium 0.8% - 1.2% Chromium 0.04% - 0.35% Zinc max 0.25% Titanium max 0.15% Other elements 0.15% total Remainder Aluminium T6 temper 6061 has an ultimate tensile strength of at least 42,000 psi (290 MPa) and yield strength of at least 35,000 psi (241 MPa). More typical values are 45,000 psi (310 MPa) and 40,000 psi (275 MPa), respectively.[3] In thicknesses of 0.250 inch (6.35 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The famous Pioneer plaque was made of this particular alloy.
4 6063-O Silicon 0.2%-0.6% Iron max 0.35% Copper max 0.10% Manganese max 0.10% Magnesium 0.45%-0.9% Zinc max 0.10% Titanium max 0.10% Other elements 0.15% total Remainder Aluminium Un-heat-treated 6063 has maximum tensile strength no more than 19,000 psi (131 Mpa), and no specified maximum yield strength. The material has elongation (stretch before ultimate failure) of 18%.
5 6063-T1 Silicon 0.2%-0.6% Iron max 0.35% Copper max 0.10% Manganese max 0.10% Magnesium 0.45%-0.9% Zinc max 0.10% Titanium max 0.10% Other elements 0.15% total Remainder Aluminium T1 temper 6063 has an ultimate tensile strength of at least 17,000 psi (117 MPa) in thicknesses up to 0.5-inch (13 mm), and 16,000 psi (110 MPa) from 0.5 to 1.0-inch (25 mm) thick, and yield strength of at least 9,000 psi (62 MPa) in thickness up to 0.5-inch (13 mm) and 8,000 psi (55 MPa) from 0.5 to 1.0-inch (25 mm) thick. It has elongation of 12%.
6 6063-T4 Silicon 0.2%-0.6% Iron max 0.35% Copper max 0.10% Manganese max 0.10% Magnesium 0.45%-0.9% Zinc max 0.10% Titanium max 0.10% Other elements 0.15% total Remainder Aluminium T4 temper 6063 has an ultimate tensile strength of at least 19,000 psi (131 MPa) in thicknesses up to 0.5-inch (13 mm), and 18,000 psi (124 MPa) from 0.5 to 1.0-inch (25 mm) thick, and yield strength of at least 10,000 psi (69 MPa) up to 0.5-inch (13 mm) and 9,000 psi (62 MPa) from 0.5 to 1.0-inch (25 mm). It has elongation of 14%.
7 6063-T5 Silicon 0.2%-0.6% Iron max 0.35% Copper max 0.10% Manganese max 0.10% Magnesium 0.45%-0.9% Zinc max 0.10% Titanium max 0.10% Other elements 0.15% total Remainder Aluminium T5 temper 6063 has an ultimate tensile strength of at least 22,000 psi (152 MPa) in thicknesses up to 0.5-inch (13 mm), and 21,000 psi (145 MPa) from 0.5 to 1.0-inch (25 mm) thick, and yield strength of at least 16,000 psi (110 MPa) up to 0.5-inch (13 mm) and 15,000 psi (103 MPa) (from 0.5 to 1.0-inch (25 mm). It has elongation of 8%.
8 6063-T6 Silicon 0.2%-0.6% Iron max 0.35% Copper max 0.10% Manganese max 0.10% Magnesium 0.45%-0.9% Zinc max 0.10% Titanium max 0.10% Other elements 0.15% total Remainder Aluminium T6 temper 6063 has an ultimate tensile strength of at least 30,000 psi (207 MPa) and yield strength of at least 25,000 psi (172 MPa). In thicknesses of 0.124-inch (3.1 mm) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%.
9 2A12 Si:0.5; Fe:0.5; Cu:3.8-4.9; Mn:0.3-0.9; Mg: 1.2-1.8; Cr:0.1; Zn:0.25; Ti:0.15; Others:0.05 strength of extension: MPa325
0.2%yield strength: MPa325
elongation:10%
fatigue strength:105
Hardness: HB120
Conductivity: 20℃,30
10 7784-181-1 PHYSICAL AND CHEMICAL PROPERTIES

Appearance: white or white with grayish hue crystalline
powder;
Physical state: solid;
Odour: odorless;
Melting temperature: 1040 °С;
Boiling temperature: sublimation at t = 1276 °С;
Density: 3,07 g/cm3;
11 nk not known not known
12 1050H14 AL:99.5%
13 YL 113 AI-Si-Cu 805*185*85
14 1050H24H44
15 1100
16 1060
17 1070
18 1200
19 2014
20 2024
21 3003
22 3105
23 5052
24 5005
25 5083
26 5754
27 6061
28 6063
29 6082
30 7075
31 8011
32 3004
33 5050
34 5086
35 5182
36 5454
37 5N
38 6463
39 6005
40 6351
41 6060
42 1370
43 3102
44 1030B
45 UBC CANS
46 ingot
47 Alucobond
1 - 47  of  47 records  
Please wait...


Aluminum Alloy/Temper:
Text:







About Us Companies Latest Products Browse Product Pictures Old Steelads Website TOP25 World Steel Companies My IP Address

Copyright © 2004-2015 B2B Metal & Steel Products Steelads.com, Gcoupon.com. All rights reserved.
Database registered in London, England, United Kingdom. Email:

My IP Address powered by Myip.ms Facebook bot last visit time powered by Myip.ms
World No.1 Global Classified Metal & Mineral Products Database
Website By