Sort 1   Sort 2    
  • Product

    Stainless Steel Pipes - Round - 304 316 316L Coiled Tubing  (Cold Rolled Seamless Pipe - Tensile 515-650MPa, ∅3.2-25.4mm...) - FOB China

  • Requirement:
  • Short Description: Small Diameter Stainless Steel Tubing
    Steel Grade: TP304, TP304L, TP316, TP316L, TP321, TP247H, etc.
  • Yield Strength: 205 MPa  -  500 MPa
  • Elongation (Min): 35 %
  • Pipe Type: Seamless Pipe
  • Thickness: 0.2 mm  -  2.5 mm
  • Outer Diameter: 3 mm  -  25 mm
  • Length: 1 meters  -  1,000 meters
  • Minimum Order Quantity: 50 kilograms
  • Terms FOB: Shanghai Port - Shanghai - China
  • Payment Terms: Оther Payment
  • Monthly Production Capacity: 500 tons per Month
  • Delivery Time/s: 30 days
  • Packaging Details: Wooden cases
  • Date of Publication: 23 Jun 2020
  • Published By: Miss Jane Y,   Ark_Steel_Tube.htmlArk Steel Tube
  • Publisher Location (according to IP address): Canada.htmlCanada  - Ontario, Ottawa
  • Detailed Description:

    Automotive Industry : Engine, Transmission, Brake & Fuel Chassis Systems.

    Power train Systems. Fluid Systems, etc

    Aircraft/Aerospace: Fluid Transfer Lines, Fire Suppression Systems, Satellite

    Guidance Systems, Heat Exchangers, etc.

    Electrical: Electrical Fittings, Connectors, etc.

    Industrial: Flow Control, Pressure Control, Gauge Systems, Automation Controls, etc.

    Instrument Tubing, Chromatography tubing, Hydraulic Tubing, High Pressure Tubing, Cleaned Tubing, Multi Core Tubing, Chemical Injection Tubing, Heat Exchanger, Etc.

  • Detail of Company who is publishing this product information

    No Company Name Country State/Region Company Picture Current Stock Lists Company Introduction
    1 Ark Steel Tube
    China.htmlChina Zhejiang ARK Steel Tube-Steel Tube Solution | Steel Tube Specialist

    ASTM A268: TP410, TP430, TP430Ti, TP409, TP444, TP439, TP446, etc.

    Alloy Steel: T1, T9, T11, T12, T21, T22, P12, P5, P91, etc.

    Austenitic Steel: 304/L/Ti, 316/L, 314, 321, 347H,310S,904L, etc.

    Nickel Alloy Steel: N02200, N04400, N06625, N06852, N06690, N08800, N08825, N010276, etc.

    Duplex Stainless Steel: S31803, S32205, S32550, S32750, S32760, S32707 etc.

    Please contact us. export (at) tubectrl.com www.arksteeltube.com
    Type of Business:

    Product List:

    Number of Employees in the Company:

    Annual Sales Value:

    Phone:
    +86 576 88805030

    Company Email:

    Company Web Site:

    Total: 1 record     Go Companies »
  • User who is publishing this product information

    No User Full Name Company Verified Manufacturer Position Phone Email Country Registration Date on Steelads.com
    1 Miss Jane Y Ark_Steel_Tube.htmlArk Steel Tube Export Manager +86 576 88805030 - Login to Steelads - China.htmlChina 23 Jun 2020
    Publisher Location (according to IP address):

    Publisher City (according to IP address):
    Ontario, Ottawa

    Total: 1 record     Go List of Employees - Metal Companies »
  • Country Details

    No Country Name Capital Region Surface Area Population
    1 Canada Ottawa North America 9,970,610 km² 31,147,000 people
    2 China Beijing Eastern Asia 9,572,900 km² 1,277,558,000 people
    Total: 2 records     Go Countries »
      • Stainless Steel Pipes - Round - 304… Standards

        No Standard No Society Summary
        1 ASTM A269 ASME
        2 ASTM A213 ASTM Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes. This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
        Scope:

        1. Scope

        1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2.

        1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.

        1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.

        1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.


        Webpage:

        3 ASME SA213 ASME Identical with ASTM Specification ASTM A213 -89a. This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes. Grades containing the letter H in their designation have requirements different from those of similar grades not containing the letter H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements. The tubes shall be made by the seamless process and shall be either hot finished or cold finished, as specified. Grade TP347HFG shall be cold finished. Heat treatment shall be done separately and in addition to heating for hot forming. The ferritic alloy and ferritic stainless steels shall be reheated. On the other hand, austenitic stainless steel tubes shall be furnished in the heat-treated condition. Alternatively, immediately after hot forming, while the temperature of the tubes is not less than the minimum solution temperature, tubes may be individually quenched in water or rapidly cooled by other means. Tension test, hardness test, flattening test, and flaring test shall be done to each tube. Also, each tube shall be subjected to the nondestructive electric test or hydrostatic test.
        Scope:

        1. Scope

         1.1 This specification covers seamless ferritic and austenitic steel boiler, superheater, and heat-exchanger tubes, designated Grades T5, TP304, etc. These steels are listed in Tables 1 and 2.

        1.2 Grades containing the letter, H, in their designation, have requirements different from those of similar grades not containing the letter, H. These different requirements provide higher creep-rupture strength than normally achievable in similar grades without these different requirements.

        1.3 The tubing sizes and thicknesses usually furnished to this specification are 1/8 in. [3.2 mm] in inside diameter to 5 in. [127 mm] in outside diameter and 0.015 to 0.500 in. [0.4 to 12.7 mm], inclusive, in minimum wall thickness or, if specified in the order, average wall thickness. Tubing having other diameters may be furnished, provided such tubes comply with all other requirements of this specification.

        1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.


        Webpage:

        Total: 3 records     Go Standards »




      About Us Companies Latest Products Browse Product Pictures Old Steelads Website TOP25 World Steel Companies

      Copyright © 2004-2015 B2B Metal & Steel Products Steelads.com, Gcoupon.com. All rights reserved.

      My IP Address powered by Myip.ms Facebook bot last visit time powered by Myip.ms
      World No.1 Global Classified Metal & Mineral Products Database